Barco IEX Series, Installation & User Manual

Page: 37 / 80

37 R5915190 /01 IEX series
Image 4 – 22
2. Select Module Flash .
3. Click Check Coefficient in Modules .
Image 4 – 23 Save calibration coefficient on receiving card
The receiving card will read coefficient from module
4. Click Save Calibration Coefficient on Receiving Card
4.3.8 Pre-storing Picture
About pre-storing picture
On the Pre-store Picture interface, you can save a picture as the prestored picture for the screen. This pre-
stored picture can be set as a screen displayed upon booting, signal cable disconnection, or DVI signal
absence.
On the main window, click Tool and select Prestore Picture .
LED Display Control Setting