Barco IEX Series, Installation & User Manual

Page: 22 / 80

R5915190 /01 IEX series 22
3.1 Package inspection
What should be checked
Check the package for damage.
If intact, check the main components against the shipping list. If any inconsistency is found, contact Barco in
time.
The main components include:
• cabinets,
• signal cable,
• power cable,
• USB cable,
• DVI cable, and
• sending box.
For details about the components, refer to the shipping list.
3.2 General installation
Overview
Screen calibration is performed on the IEX series product before shipment, and the product needs to be
installed sequentially according to the cabinet number. See next drawing.
Image 3 – 1 Rear view of the display
3.3 Fixed installation
How to handle
1. Check whether the bottom beam is level. Make sure that its levelness is within ±1mm.
2. Install the cabinets sequentially from bottom to top and from middle to both sides. In addition, fix the
connecting plates and cabinets with installation screws to the square tubes.
3. Keep proper joints and flatness between the cabinets during cabinet installation
Installation and Wiring