1. ICMP HDD replacement kit
1
Image 1-7
4. Push the HDD completely inside its slot, close the handle, and move the latch towards the right.
Image 1-8
5. Switch on the projector.
In case you replace one HDD (e.g. degraded mode) the ICMP automatically starts with
the RAID recovery process. The red LED of the HDD which has to be rebuilt is blinking.
This process takes about 3 to 5 hours. Once the RAID is completed the red LED turn off.
C
AUTION
:
It’s strongly recommended to complete the RAID recovery process prior to
start a show. This to ensure that the content is protected and that the show is not inter-
rupted.
R5905769 ICMP HDD 11/02/2014
5