3.1.2 The Bac k Panel
The back panel of your H
ERMES
DXD looks like this or similar:
A
B
C
A
Main Switch
B
AC In
C
AC Out
Figure 3-3
The
Main Switch
[A] is for switching H
ERMES
DXD on and off. If the
0
is visible on top of the switch,
the device is switched off, and it can be switched on by pressing the switch.
The
AC In
socket [B] is for connecting to a power supply as specified in section
7.1.2 Power Supply
.
The
AC Out
socket [C] is for connecting further devices (of type H
ERMES
DXD only!) to the power sup-
ply.
AC Out
is connected directly to
AC In
and is live as soon as
AC In
is connected to a power supply.
Up to max. ten H
ERMES
DXD devices can be put on top of each other. Thus you can
group the devices into towers next to each other, e. g., in the same order as the pro-
jection cubes are arranged.
To protect H
ERMES
DXD from overheating, the air supply openings in the case must
not be covered! If you group the devices into towers standing next to each other a
space between the devices not less than 10 centimeter must be kept!
