Command "s": interconnection digital input 1 to digital output 2
Description: Via this command the
RCM
tells the
RCS
of class
m
to switch the signal of the first input
(
DIGITAL IN 1
) to the second digital output
DIGITAL OUT
2
.
The
RCS
executes the command and sends the acknowledge which informs via the status
register about the auto switch status (enabled or disabled) and if there is a sync signal on
DIGITAL IN 1
or not.
These conditions together determine the behavior of the
RCS
.
Example:
The command
s
is sent to the second
RCS
:
message
<STX> <TYPE> <ADDRH> <ADDRL>
<Body>
<STATH>
<STATL
<CHKH>
<CHKL> <ETX>
m
0
2
s
4
2
Let's assume the first input is provided with a signal. Independent from the the status of
autoswitch,
DIGITAL OUT 2
is routed then to
DIGITAL IN 1
.
Let's further assume: autoswitch disabled, sync signal present on input 2, output 1 routed
to input 2.
Thus the status register looks like this:
Status
Auto Switch
Out2
true
Out1
true
Reserved
Out2
target
Out1
target
Prsnt2
Prsnt1
0
0
1
0
0
1
0
1
Thus the acknowledge sent from the second RCS to the master reads:
Acknowledge <STX> <TYPE> <ADDRH> <ADDRL>
<Body>
<STATH>
<STATL
<CHKH>
<CHKL> <ETX>
m
0
2
s
2
5
a
9
Result:
The actual routing of
DIGITAL OUT 2
is the target routing, and the signal present on
DIGITAL INPUT 1
is displayed on the projection module connected to
DIGITAL OUT 2
.