![background image](http://html1.mh-extra.com/html/barco/hdf-w-series/hdf-w-series_service-manual_474148065.webp)
5. Troubleshooting
Code 7624: “Lamp temp low” (Error)
This error code is probably preceded by the warning code 7625: “Lamp temp low”. The same troubleshooting table can be applied
to.
Code 7625: “Lamp temp low” (Warning)
Situation
Solution
The temperature in the Lamp House
of the projector is almost below
the minimum required operating
temperature of the projector.
Make sure that the ambient temperature is within specs: higher then 10°C (50°F). Let
the projector acclimate. Do not ignite the lamp, otherwise there is a risk for condensate.
Defect temperature sensor
(reference 1image 5-24) which
measures the temperature inside the
Lamp House.
Replace the temperature sensor of the Lamp House. The temperature sensor of the
Lamp House is located under the top cover plate of the Lamp House. Safely remove the
lamp from the Lamp House prior to remove the top cover of the Lamp House.
1
Image 5-24
Code 7626: “Lamp temp high” (Warning)
Situation
Solution
Blocked air inlet channel.
Ensure that the air inlet at the front bottom of the projector is not blocked. Provide a
suf
fi
cient free area at the front of the projector so that fresh air can freely enter the air
inlet channel.
The wire unit of the Lamp Info
Module (LIM) is disconnected from
the Power Distribution board.
Check if the wire unit (reference 5 image 5-25) of the Lamp Info Module is connected
with the power distribution board.
The wire unit of the temperature
sensor inside the Lamp House is
disconnected from the Lamp Info
Module.
Check if the wire unit (reference 1 image 5-26) of the temperature sensor inside the
Lamp House is connected with the Lamp Info Module. The temperature sensor and
Lamp Info Module of the Lamp House are located under the top cover plate of the Lamp
House. Safely remove the lamp from the Lamp House prior to remove the top cover of
the Lamp House.
Malfunction Fan Control board.
Replace the Fan Control Board. See "Replacing the Fan control board", page 278.
Defect temperature sensor
(reference 1image 5-24) which
measures the temperature inside the
Lamp House.
Replace the temperature sensor of the Lamp House. The temperature sensor of the
Lamp House is located under the top cover plate of the Lamp House. Safely remove the
lamp from the Lamp House prior to remove the top cover of the Lamp House.
R5905312 HDF W SERIES 24/01/2013
61
Summary of Contents for HDF W series
