Barco GALAXY R9040310, Owner'S Manual

Page: 67 / 97

9. Installation Mode
9. INSTALLATION MODE
Overview
• Start up of the Installation mode
• Input Slots
• 800 peripheral
• Source Switching
• No Signal
• Convergence
• Configuration
• Lens Adjustment
• Quick Access Keys
• OSD
• Internal Patterns
9.1 Start up of the Installation mode
Start up
1. Push the cursor key
↑
or
↓
to highlight Installation . (menu 9-1)
2. Press ENTER .
The Installation mode menu will be displayed. (menu 9-2)
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
Select with
↑
or
↓
then <ENTER>
<EXIT> to return.
Menu 9-1
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
SOURCE SWITCHING
NO SIGNAL
CONVERGENCE
CONFIGURATION
LENS
QUICK ACCESS KEYS
OSD
INTERNAL PATTERNS
Select with
↑
or
↓
then <ENTER>
<EXIT> to return.
Menu 9-2
9.2 Input Slots
What can be done ?
The input configuration of the variable inputs is shown in the Input slots menu.
To view or the change the input configuration.
1. Push the cursor key
↑
or
↓
to highlight Input Slots . (menu 9-3)
2. Press ENTER to select.
The input slots menu will be displayed. (menu 9-4)
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
SOURCE SWITCHING
NO SIGNAL
CONVERGENCE
CONFIGURATION
LENS
QUICK ACCESS KEYS
OSD
INTERNAL PATTERNS
Select with
↑
or
↓
then <ENTER>
<EXIT> to return.
Menu 9-3
INPUT SLOTS
1. RGB-SS [CV or HS & VS]
2. RGB-SS [CV or HS & VS]
3. No module
4. No module
______________
1. DVI OUTPUT [Active Image]
Select with
↑
or
↓
then <ENTER>
<EXIT> to return.
Menu 9-4
R5976445 BARCO GALAXY 15042003 63