Barco GALAXY R9040310, Owner'S Manual

Page: 69 / 97

9. Installation Mode
Defining the output module
To define the output module:
1. Push the cursor key
↑
or
↓
to highlight 800 Peripheral . (menu 9-5)
2. Press ENTER to select.
3. Push the cursor key
↑
or
↓
to highlight Output module . (menu 9-6)
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
SOURCE SWITCHING
NO SIGNAL
CONVERGENCE
CONFIGURATION
LENS
QUICK ACCESS KEYS
OSD
INTERNAL PATTERNS
Select with
↑
or
↓
then <ENTER>
<EXIT> to return.
Menu 9-5
800 PERIPHERAL
OUTPUT MODULE [STANDARD]
INFRARED [PPM]
Select with
↑
or
↓
then <ENTER>
<EXIT> to return.
Menu 9-6
9.3.2 Defining the Infrared Communication protocol
Which protocols are available?
When a peripheral is connected to the ’Comm Port’, the communication can be in PPM or RC5.
The type of communication can be set to :
• PPM
• RC5
Defining the communication protocol.
1. Push the cursor key
↑
or
↓
to highlight 800 Peripheral . (menu 9-7)
2. Press ENTER to select.
3. Push the cursor key
↑
or
↓
to highlight Infrared . (menu 9-8)
4. Press ENTER to select.
5. Press ENTER to toggle between [PPM] or [RC5].
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
SOURCE SWITCHING
NO SIGNAL
CONVERGENCE
CONFIGURATION
LENS
QUICK ACCESS KEYS
OSD
INTERNAL PATTERNS
Select with
↑
or
↓
then <ENTER>
<EXIT> to return.
Menu 9-7
800 PERIPHERAL
OUTPUT MODULE [STANDARD]
INFRARED [PPM]
Select with
↑
or
↓
then <ENTER>
<EXIT> to return.
Menu 9-8
9.4 Source Switching
Switching from one source to another.
To minimize undesired effects when switching from one source to another one can use the Seamless switching mode, beside Seam-
less switching there is a choice between several effects which render the transitions more enjoyable.
R5976445 BARCO GALAXY 15042003 65