Barco G50, User Manual

Page: 42 / 180

R5916676 /00 G50 42
7.1 Source menu overview
Menu overview
Image 7–1 Example of the Source menu
Auto signal
Select the Auto Signal checkbox to enable the feature. When Auto Signal is enabled, the projector
automatically detects and selects the input signal.
Once an input source is selected, you can still press the Input button on the remote control or keypad to switch
to other available sources.
Input signal
Select an input signal from the source list. The available input sources are:
• HDMI 1
• HDMI 2
• HDBaseT
• DisplayPort
PIP/PBP
The feature to enable picture-in-picture or picture-by-picture. For more info, see “Picture-in-Picture and
Picture-By-Picture”, page 44 .
Auto HDMI Switch
Select the Auto HDMI Switch checkbox to enable the feature. If enabled, the projector will only look at HDMI 1
and HDMI 2 as input sources.
HDMI2 has a higher priority than HDMI1. This means that in case the current input is HDMI1, the input signal
will be forced to HDMI2 if a valid signal is detected on the HDMI2 input.. The input signal will automatically
switch back to HDMI1 if you remove the HDMI2 signal.
When Auto HDMI Switch is enabled, you can only choose HDMI1 and HDMI2 as valid input
sources.
User controls — Source menu