Barco G50, User Manual

Page: 156 / 180

R5916676 /00 G50 156
C.3 LAN function
Overview
Item
Specifications
Crestron 2.0 RoomView, Port: 41794
Control system
PJ-Link Support v2.0, without security, Port: 4352,
AMX Device discovery only, Port: 9131
Telnet Port: 3023
Webpage English only, Port 80
Extron Port: 2023
Making a connection
To make a LAN connection with the projector, use the projector’s IP address and the correct port number
depending on the used protocol. See previous table.
Example for Telnet:
1. Select: TCP/IP
2. Host: 192.168.0.100 (Projector IP)
3. Service: Telnet
4. TCP port: 3023
For other protocol Barco will only give a list of commands but is not be able to give system support.
Example for Power On/Off
1. Make connection:
Image C–2
2. Click OK to start up.
3. Enter the power on and power off command (see list of commands)
Image C–3
Crestron 1.0 command list
Item
Type
Join Number
Assign To Name Serial 5051
Brightness Level Analog 5002
Brightness Minus Digital 5110
Brightness Plus Digital 5109
Color Level Analog 5001
Color Minus Digital 5108
Communication protocols