INTRODUCTION
When referring to the term FS33 in this document,it means that the content is applicable for
following Barco products:
•
FS33 IR WUXGA
•
FS33 IR WQXGA
The FS33 IR is a state of the art NVG (Night Vision Goggle) stimulation LED projector which
include a fourth LED light chip that emits infrared light beyond the range visible to the human
eye. The product is capable of visualizing night-time and limited-visibility scenario simulation
as well as visible day-time or pitch black scenarios from the common display engine in order
to have a true-to-life simulation. The FS33 IR is single channel input and handles the content
through one of the input connectors (HDMI/DVI/VGA). The infrared wavelength is optimized
for the performance of the optics in the projector and the night vision goggles present in the
market today. The projector’s solid-state light source provides a completely constant light
output over time, eliminating the need for recalibration, reducing maintenance and total cost
of ownership to a minimum.
FEATURES
• NVG stimulation by a fourth Infrared LED
• 1920x1080 and 1920x1200 resolution
• Dimmable to extreme low lumens output of the visible RGB display
• Project visible display for daytime images
• Project infrared display only, no visible image to the unaided human eye
• Simultaneous project visible and infrared for limited visibility scenario
• Smear reduction sequence
• Infrared power adjustments
MENUS
BrilliantColor
TM
sequences:
There are 5 sequences to choose in the REALCOLOR menu. These displays differently when
it comes to sequence modes for color points versus lumens output.
• Vizsim
• Graphics
• HighBrightness
• Darktime 6ms (smear reduction)
• Darktime 8ms (smear reduction)
IR menu:
A separate IR menu which works with each BrilliantColor
TM
sequence listed above,
controls the infrared and visual RGB performance.
IR LED enable:
Turns infrared LED on/off.
