9. Settings menu
9. SETTINGS MENU
Overview
•
•
•
9.1
Communication
About
System settings / Communication
Current Ethernet communication information is given, and can be edited in this menu.
Default mode for Ethernet communications are: Automatic ON / IP Version 4 DHCP mode.
Setting
Description
Automatic
ON
DHCP enabled
OFF
Static
IP version 4
Static mode
Set address, subnet mask and default gateway according to network speci
fi
cation.
DHCP mode
Assigned IP address, subnet mask and gateway.
Manually set up the IP adress
Go to the menu
System settings / Communication / LAN
Enable the Auto zone on the display and press enter. The Auto zone will change to “Manual”.
Scroll down, and modify the desired
fi
elds. When in the desired
fi
elds, press “Enter” to enable the virtual keyboard, enter the desired
values, and press “Enter” again to con
fi
rm the change.
9.2
Apply a menu theme
About
System settings / Themes
Themes are used to apply a prede
fi
ned functionality to the OSD display. There are two options: light (default) or dark.
9.3
Service
About
System settings / Service
The Service Menu is for service personnel and / or advanced users only.
The menu is password protected.
601–426 F70 SERIES 16/06/2017
59
Summary of Contents for F70 - W6
