1. Communication settings
1. COMMUNICATION SETTINGS
Overview
•
Set up LAN Communication
•
Set up RS232 communication
1.1
Set up LAN Communication
General
The supported RS232 settings are as follows:
Parameter
Data
Baud rate
19200
Data bits
8
Parity
None. There is no parity bit used to perform error checking.
Stop bits
1. One stop bit is used to de
fi
ne the end of a character.
Flow control
None.
General
The default settings of the projector when shipped are as follows:
Description
Value
DHCP
On
IP address
0.0.0.0
Subnet mask
0.0.0.0
Default gateway
0.0.0.0
TCP/UDP port
1025
Input IP settings on the projector
Before you connect the projector to your LAN make sure that the IP settings are set correctly, according to your LAN con
fi
guration.
IP settings can be changed using the projector On Screen Display (OSD) Settings menu.
Set up can be done automatically using DHCP (Dynamic Host Con
fi
guration Protocol). When DHCP is enabled, it may take up to a
minute for the projector to receive IP settings from the DHCP server. The IP address will be updated and shown in the OSD. If there
is no DHCP server in the network the projector will be assigned a “zero con
fi
guration” address, 169.254.0.0/16.
Alternatively, DHCP can be manually disabled and the user can manually input the projector IP address, Subnet mask and Gateway
in the LAN network menu of the OSD.
To renew an IP address, select “renew” in the OSD LAN settings menu.
Connect the projector and the host
As soon as the projector IP settings are set correctly, you can physically connect the selected host, for example a computer, and the
projector. This can be done in two ways:
•
use a crossover twisted pair (TP) cable directly from the computer to the projector
•
use two straight-through TP cables with a HUB or a switch between them
1.2
Set up RS232 communication
Connect to the projector
Connect the projector and host using a standard straight through serial cable (host : female, projector : male).
Pin 2 connects to Pin 2, Pin 3 connects to Pin 3, and Pin 5 connects to Pin 5.
601–0381–00 F(L)35, FS35 IR, F85 21/10/2015
1
All manuals and user guides at all-guides.com
