![background image](http://html1.mh-extra.com/html/barco/dp2k-slp-series/dp2k-slp-series_user-and-installation-manual_474005028.webp)
3. Installation process
3.1
Installation process overview
Installation process Projector
1.
Check if all installation requirements are ful
fi
lled
such as the environment conditions of the installation area, electrical facili-
ties, etc. Note that a solid pedestal is required to support the projector. For more info see topic
installation requirements
.
2.
Physical installation of the projector
upon its pedestal.
3.
Electrical connection with the power net
. See "Connecting the projector with the power net", page 31.
4.
Installation of the lens
. First select a lens with appropriate throw ratio covering the screen size and the projector - screen
distance. Then install the lens in the lens holder of the projector. For more information about available lenses, lens selection and
lens installation see chapter "Lens installation", page 36.
Caution:
The projector is delivered with a plastic cover inside the Lens Holder. Remove the cover prior to installing the lens.
5.
Installation of the ICMP, IMB, IMS or HDSDI input module
. (only in case no ICMP, or IMB or IMS or HDSDI is factory installed).
6.
Installation of the HDDs.
In case the HDDs of the ICMP are delivered separated from the projector remove the protection tape
from the HDD input slots and install all three HDDs as described in the procedure"Installing a HDD into the ICMP", page 80.
Make sure that all HDDs in the ICMP HDD set have the same storage capacity. See label on top of the HDD to know the storage
capacity.
7.
Installation of the optional Communicator Touch Panel
. See chapter "Installing the Touch Panel interface", page 86.
8. Upgrade all software to the latest available version. See "Software upgrade", page 25.
9. Start up your projector and adjust the system. See "Starting up and adjusting the system", page 26.
24
R5906847 DP2K SLP SERIES 02/06/2017
Summary of Contents for DP2K SLP Series
