![background image](http://html1.mh-extra.com/html/barco/dp2k-slp-series/dp2k-slp-series_user-and-installation-manual_474005084.webp)
7. ICMP
7.16 Installing a HDD into the ICMP
This procedure assumes that the HDD slot of the ICMP is empty. If not, see procedure "Removing a HDD from
the ICMP", page 79.
C
AUTION
:
Always use a new empty spare part HDD from Barco to replace a malfunction HDD. Do not use a
HDD from another ICMP HDD set.
C
AUTION
:
Always make sure that all HDDs in the ICMP HDD set have the same storage capacity. See label
on top of the HDD to know the storage capacity.
How to install a HDD ?
1. Ensure that the projector is switched off.
2. Prepare the HDD for insertion by moving the latch towards the left and push the unlock button to open the handle.
Image 7-18
3. Insert the HDD into the HDD slot. Ensure that the handle is suf
fi
ciently open so that the hook (reference 1) of the handle can
pass the front plate of the ICMP.
1
Image 7-19
4. Push the HDD completely and
fi
rmly inside its slot, close the handle, and move the latch towards the right.
80
R5906847 DP2K SLP SERIES 02/06/2017
Summary of Contents for DP2K SLP Series
