![background image](http://html1.mh-extra.com/html/barco/dp2k-s-series/dp2k-s-series_user-and-installation-manual_4093724124.webp)
15. Removal and installation of the projector covers
15.3 Removal of the top cover
W
ARNING
:
Switch off the projector prior to start with this procedure, unless otherwise speci
fi
ed in the pro-
cedure.
To remove the top cover from the projector the Communicator Touch Panel has to be removed
fi
rst if installed
onto the top of the projector. This procedure assumes that the Communicator Touch Panel is not installed
onto the top of the projector.
Necessary tools
7mm
fl
at screwdriver.
How to remove the top cover?
1. Loosen the four captive screws (reference 1 image 15-3) of the top cover using a 7mm
fl
at screwdriver.
2. Remove the top cover from the projector.
1
Image 15-3
120
R5977692 DP2K-S SERIES 10/12/2012
Summary of Contents for DP2K-S Series
