![background image](http://html1.mh-extra.com/html/barco/dp2k-c/dp2k-c_user-and-installation-manual_3937567065.webp)
65
R5905752 /16
DP2K C
Scheimpflug adjustment points
4
1
2
3
d
D
c
C
A
a
B
b
Image 5
–
18 Scheimpflug adjustments
Indication on
drawing
Function
4
Locking nut
1, 2 and 3
Scheimpflug adjustment nuts
A, B, C and D
Set screws
a, b, c and d
lock nuts
1, 2 and 3 are adjustment points.
4 is a locking point and NOT used during Scheimpflug adjustment.
Required tools
•
Allen key 3 mm
•
Nut driver 13 mm
•
Nut driver 10 mm
How to adjust
1.
Project a green focus pattern.
Image 5
–
19
2.
Loosen the lock nuts (a, b, c and d). See Image 5
3.
Loosen the 4 set screws (A, B, C and D) by 1 cm. See Image 5
4.
Fully loosen lock nut 4. See Image 5
5.
Optimize the focus of the projected image as follows:
1. Place the zoom lens in TELE position (smallest projected image) and adjust the focus using the lens
focus barrel or motorized focus control.
Summary of Contents for DP2K C
