Messages, warnings and failure codes
8-2
5976053 BARCODATA 808s SP 010799
WARNING :
go to
stand by
Projector will switch to
'stand-
by'
when the RCVDS is no longer
available.
WARNING :
invalid
frequency
input
The entered frequency or ap-
plied frequency of the source is
out of the projector's range.
WARNING :
default
settings
loaded in
the E2PROM
Adjustment settings are lost. Re-
load using Projector Control Soft-
ware via PC or MAC (if this option
is available), or readjust image.
table is
deleted
Message to inform that selected
table is deleted. This message
will be followed by
'confirm mes-
sage'
, on which the user has to
answer.
FAILURE
invalid
RWI soft
version
Wrong software version in your
projector. Call for technical sup-
port.
FAILURE
I
2
C error
addr. : 7FH3
Hardware failure. Call a quali-
fied service technician for re-
pair.
FAILURE
short
circuit on
I
2
C bus
Hardware failure. Call a quali-
fied service technician for re-
pair.
FAILURE
RCVDS com-
munication
error
Serial communication error be-
tween RCVDS and projector.
FAILURE
RWI commu-
nication
error
Hardware failure. Call a quali-
fied service technician.
FAILURE
IRIS commu-
nication
error
Communication error between
IRIS and the projector. Call a
qualified service technician.
WAIT
starting
up
IRIS
Message during the start up of
the IRIS. Message will disappear
when the IRIS is ready to accept
commands.
All manuals and user guides at all-guides.com
