Barco Coronis Fusion 4MP, Getting Started Manual

Page: 17 / 44

Display parts, controls and connectors
17
To display the OSD (on-screen display). In the OSD, this button acts
as Enter button to make selections.
4. Standby touch key
To put the display in standby mode.
5. Power LED
Indicates the display’s power status.
Green:
Display is on (when enabled in the OSD).
Orange:
Display is in Standby power-saving mode.
Off:
Display is disconnected from the power or the LED’s on state is
disabled in the OSD.
Note:
When the LED is disabled in the OSD, it will still be
activated (green) when the display is on but does not receive any
video signal.
Rear
Figure 2: Rear view
1
2
3
4
5
6