1. Cooler rigging frame
F1
F2
V2
P4
V1
P1
R
E
S
P3
P2
Image 1-1
Necessary tools
•
Torque Wrench with
large
17 mm hex socket
•
Allen wrench 6 mm
The large 17 mm hex socket is not a common type of socket. Make sure you have this at your disposal before
assembling the frame.
1.3
Assembling the frame
Necessary tools
•
Torque wrench with large 17 mm hex socket
•
Allen wrench 6 mm
•
High strength threadlocker (e.g. Loctite 262)
How to assemble
1. Assemble the vertical frames (V1 & V2) onto the bottom frame (F2) as illustrated. Use the rigging screws (R) to tighten them
together.
Vertical frames V1 have a
fi
xation hole on one side (1). These vertical frames must be mounted on the bottom frame on the side
where the frame has 2
fi
xation holes on each side (2).
Caution:
Use high strength threadlocker on the rigging screws thread. Tighten the rigging screws with a torque of 40 Nm.
2
R5906813 COOLER RIGGING FRAME 13/12/2016
