1. Cooler rigging frame
Image 1-11
1.6
Suspending the coolers from a truss
W
ARNING
:
It is the responsibility of the installer to suspend the rigging frames in a safe and secure fashion.
About suspending the coolers from a truss
The coolers can be suspended from a truss using the rigging frame for coolers.
Take the following things into account:
•
If suspension clamps are used, they can be placed on any of the round pro
fi
les of the frame. The number of clamps required
depends on the types of clamps used. Always make sure you use at least 4 clamps: 2 clamps at 2 opposed sides of the frame.
Make sure to takes into account the total weight of frame and coolers suspended from the truss.
How to sup
1. Measure the distance between the two used support bars of the truss, using the center tube as reference.
X mm
Image 1-12
Example of truss
2. Install the rigging clamps according the measured distance and secure this position. Ensure that the rigging points are symmet-
rically lined up, so that the cooler will hang in balance.
Warning:
Always use four (4) rigging points, equally spread, to suspend the projector.
R5906813 COOLER RIGGING FRAME 13/12/2016
7