![background image](http://html.mh-extra.com/html/barco/clm-w6/clm-w6_user-manual_473964029.webp)
29
CLM W6
4. User Controls
4.1.2 Input Menu
Input Select
Select the active source, include the following options:
HDMI 1
HDMI 2
VGA 1
VGA 2
RGB
YUV
S-Video
Video
Input Locking
Specify the frequency of the image input signal.
Auto: Default value. Lock to input.
50Hz: Set image output frequency at 50Hz.
60Hz: Set image output frequency at 60Hz.
Auto Power Off
Switch off after a while when no sync detected.
Off: Default value. Disable auto power off function.
On: Projector will switch off automatically when no signal for 20 minutes.
Auto Power On
The projector turns on automatically when switch on projector after con-
necting power.
Off: Default value. The projector stays off when AC power is applied.
The user must power on the projector.
On: The projector turns on automatically when switch on projector after
connecting power.