R5900085 /03
ClickShare CSE-200+
4
1.1 General safety
Safety warnings
The installation of the device must comply with the guidelines in the ClickShare Installation Guide.
•
Installation must be performed by qualified personnel only, and must conform to all local codes.
•
External power connections must be properly insulated.
•
Do not connect directly to mains power for any reason.
•
To prevent injuries and physical damage, always read this manual and all labels on the system before
connecting to the wall outlet.
•
The ClickShare product is intended to be used in office and indoor environments only.
•
Only use the power adapter supplied with your device. While appearing to be similar, other power adapters
have not been safety tested at the factory and may not be used to power the device. For a replacement
power adapter, contact your dealer.
•
This product is intended to be supplied by a UL Listed Power Unit marked
“
Class 2
”
or
“
LPS
”
or
“
Limited
Power Source
”
input 100-240V, 1.5A 50/60Hz and with output rated 12 VDC 4.17A.
•
Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the
cord. To disconnect the cord, pull it out by the plug. Never pull the cord itself.
•
If an extension cord is used with this product, make sure that the total of the Ampere ratings on the
products plugged into the extension cord does not exceed the extension cord Ampere rating.
•
Never spill liquid of any kind on the product. Should any liquid or solid object fall into the cabinet, unplug
the set and have it checked by qualified service personnel before resuming operations.
•
Lightning - For added protection for this product during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the device due to
lightning and AC power-line surges.
•
Only use attachments/accessories specified by the manufacturer.
Environment
Do not place this equipment on an unstable cart, stand, or table. The product may fall, causing serious
damage to it.
Risk of electric shock
Do not open. To reduce the risk of electric shock, do not remove the cover of the unit or of the power supply
unit. No user- serviceable parts inside. Refer all servicing to qualified service personnel.
Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following
conditions:
•
When the power cord or plug is damaged or frayed.
•
If liquid has been spilled into the equipment.
•
If the product has been exposed to rain or water.
•
If the product does not operate normally when the operating instructions are followed. Adjust only those
controls that are covered by the operating instructions since improper adjustment of the other controls may
result in damage and will often require extensive work by a qualified technician to restore the product to
normal operation.
•
If the product has been dropped or the cabinet has been damaged.
•
If the product exhibits a distinct change in performance, indicating a need for service.
•
Replacement parts: When replacement parts are required, be sure the service technician has used original
BARCO replacement parts or authorized replacement parts which have the same characteristics as the
BARCO original part. Unauthorized substitutions may result in degraded performance and reliability, fire,
electric shock or other hazards. Unauthorized substitutions may void warranty.
•
Safety check: Upon completion of any service or repairs to this device, ask the service technician to
perform safety checks to determine that the product is in proper operating condition.
Heat and Fire Hazard
Warning
–
risk of fire: do not place flammable or combustible materials near the device!
Barco products are designed and manufactured to meet the most stringent safety regulations.
