Service Mode
R5976101 BARCO CINE 5 ___________________________________________________________________________________
7-3
PROJECTOR SET-UP
or
<EXIT> to return
then <ENTER>
Select with
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJECTOR ADDRESS
CHANGE BAUD RATE
POWERUP MODE : Standby
COMMON ADDRESS
IDENTIFICATION
TOTAL RUN TIME
PROJECTOR SET-UP
or
<EXIT> to return
then <ENTER>
Select with
CHANGE LANGUAGE
CHANGE PROJECTOR ADDRESS
CHANGE BAUD RATE
POWERUP MODE : Standby
COMMON ADDRESS
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
PROJECTOR SET-UP
or
<EXIT> to return
then <ENTER>
Select with
CHANGE PROJECTOR ADDRESS
CHANGE BAUD RATE
POWERUP MODE : Standby
COMMON ADDRESS
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
Total Run Time
Highlight
Total Run time
using the arrow keys and then press
ENTER
to
display the total time the projector has run since its first start up at the factory.
EXIT
returns to the Service Mode menu.
Note : All projectors leave the factory after a burn-in period of
approximately 100 hours.
LANGUAGE
ENGLISH
ESPANOL
FRANCAIS
DEUTSCH
or
<EXIT> to return
then <ENTER>
Select with
PASSWORD
ENTER NEW PASSWORD
0 0 0 0
PASSWORD
Password will be
reprogrammed as
<ENTER> to
<EXIT> to return
Change Password
This item is password protected.
Highlight
CHANGE PASSWORD
using the arrow keys and then press
ENTER
. The current password is displayed. The new
password must consist of 4 digits, 0 to 9. Select the digit to be changed with the arrow keys and use the numeric keys to enter
the new digits.
Press
ENTER
to save the new password. Before saving, a confirmation screen will be displayed.
Press
EXIT
to return to the Projector Setup menu without saving the new password.
When the displayed password is correct, press
ENTER
to save. If not correct, press
EXIT
to cancel the saving.
Change Language
Using the arrow keys, highlight
CHANGE LANGUAGE
and then press
Enter
to display the list of languages available for the screen
displays. The following languages are available :
- English
- Spanish
- French
- Deutsch
Highlight the language of your choice and then press
ENTER
.
Pressing
EXIT
returns to the
PROJECTOR SETUP
menu.
