- 5 -
Chapter 1 : Preparation
Survey
Precautions
Handling
Precautions:
s
The LCD module is a glass plate product and is easily damaged by stress.
s
The LCD module should be handled with care. Do not touch the glass surface and
the anti-reflective coating. Hold only by the surrounding metal plate.
s
Make sure not to apply DC voltage to the module; this can damage the module.
s
The appropriate ANTI-STATIC PROTECTION steps should be taken in handling the
LCD module.
Mounting
Precautions:
s
Be sure to power down and unplug the projector before removal/insertion of the
connector cable.
s
In case of LCD panel breakage, avoid contact with the liquid. It is harmful if swallowed.
Avoid contact with the eyes, skin, or clothing. In case of contact, flush the area with
water. Then wash the area with soap and water.
s
Immediately wipe off any liquid spilled on the display area because its adherence may
cause deformation or color spots.
s
Do not touch the display area and contact terminals with bare hands. Finger prints will
cause a smeared image on the screen and could lead to poor connections on the flex
foil contacts.
Storage:
Please store the LCD panels as follows:
s
Place the LCD panels in a dark place with no exposure to direct sunlight or light. Keep
temperature within the range of 0°C to 35°C (32°F to 95°F).
s
Avoid contact of the polarizer surface with any other materials.
s
Do not store the image block for more than 50 hours (about 5 days) under direct sunlight
(about 10000 lx).
Anti-static
Protection
Steps:
If it is impossible to remove a module in a safe area for the replacement of static sensitive
parts, the following steps should be taken:
s
Ensure that the equipment is switched off.
s
Wear a wrist band which is connected to the ground for the equipment in question while
handling the static sensitive parts.
WARNING
LCD PANELS ARE VERY SENSITIVE DEVICES. OBSERVE FULL
PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES.
This chapter handles all procedural steps to be performed before starting :
Subject
Page no.
Contents of the Kit
6
Preparation
7
Electrical disconnection of MOCA servo motors
9
In this Chapter
Purpose
Unpack the kit and check if all necessary materials are included.
Summary of Contents for BG9300
Page 12: ... 12 Image 2 ...
