Barco BG9300 Installation Manual Download Page 4

Page: 4 / 25

- 4 -

Table of Contents

(continued)

Chapter 3 : Electrical Connections ------------------------------------------------ 21

Electrical Connection of the Servo Motors to the MOCA Module ------ 22

How to Guide the Cables of the Servo Motors ------------------------------------------------------------------------------ 22

Which Plug in Which Connector ----------------------------------------------------------------------------------------------- 23

Electrical connection of the LCD Panels and Starting up of the

Projector ------------------------------------------------------------------------------------ 24

Location of the LCD Panels ----------------------------------------------------------------------------------------------------- 24

Electrical Connection of the Panels ------------------------------------------------------------------------------------------- 24

How to Close the Top Cover ---------------------------------------------------------------------------------------------------- 24

Illustration Top Cover removal -------------------------------------------------------------------------------------------------- 25

How to Start Up the Projector --------------------------------------------------------------------------------------------------- 25

Summary of Contents for BG9300


























Search results

Summary of Contents for BG9300

Reviews:

Related manuals for BG9300

Brands by name

Popular brands

Barco BG9300, Installation Manual

Search results

Summary of Contents for BG9300

Reviews:

Related manuals for BG9300

Brands by name

Popular brands