Barco BarcoVision R9000740, Owner'S Manual

Page: 96 / 161

RANDOM ACCESS ADJUSTMENT MODE
R5975238 BARCOVISION 701 MULTIMEDIA 070497
RANDOM ACCESS ADJUSTMENT MODE
R5975238 BARCOVISION 701 MULTIMEDIA 070497 8-20
RANDO
M ACC
ESS A
D
J
U
S
T
M
EN
T
M
O
D
E
8-20
RANDO
M ACC
ESS A
D
J
U
S
T
M
EN
T
M
O
D
E
Horizontal Size Adjustment
Push the control disk up or
down to highlight
H SIZE on
the Geometry menu and then
press
ENTER .
G E O M E T R Y
Se lec t w ith o r
t h e n < E N TE R >
< E X I T> t o r e t u r n
H P H A S E
R A S T E R S H I F T
L E FT - R I G H T ( E - W )
TO P - B O TT O M ( N - S )
H S I Z E
V L I N E A R I T Y
V S I Z E
B L A N K I N G
ENTER
will select horizontal size adjust-
ment
EXIT returns to random access adjustment
mode menu.
ADJUST
returns to operational mode
H S IZ E
7 0
Adjust the horizontal size by
pushing the control stick to the
right or to the left until the exact
image width is obtained.
Note :
- if the internal # pattern was
selected, this pattern re-
mains on the screen.
- if the genlocked pattern was
selected, the external source will be
displayed.
A bar scale and a number indicator give
a visual indication of the horizontal size
adjustment.
Hint : In order to avoid loss of resolution
in the projected image and to ensure
maximum CRT longevity, do not use an
excessively small horizontal size set-
ting.
EXIT will return to Geometry
Ideal image size
H size too
small
H size too
large
Horizontal Size Adjustment
Push the control disk up or
down to highlight
H SIZE on
the Geometry menu and then
press
ENTER .
G E O ME T R Y
Se lec t wi th o r
t h e n < E N T E R >
< E X I T> to r e t u r n
H P H A S E
R A S T E R S H I F T
L E F T - R I G H T ( E - W )
TO P - B O T TO M ( N - S )
H S I Z E
V L I N E A R I TY
V S I ZE
B L A N K I N G
ENTER
will select horizontal size adjust-
ment
EXIT returns to random access adjustment
mode menu.
ADJUST
returns to operational mode
H S IZ E
7 0
Adjust the horizontal size by
pushing the control stick to the
right or to the left until the exact
image width is obtained.
Note :
- if the internal # pattern was
selected, this pattern re-
mains on the screen.
- if the genlocked pattern was
selected, the external source will be
displayed.
A bar scale and a number indicator give
a visual indication of the horizontal size
adjustment.
Hint : In order to avoid loss of resolution
in the projected image and to ensure
maximum CRT longevity, do not use an
excessively small horizontal size set-
ting.
EXIT will return to Geometry
Ideal image size
H size too
small
H size too
large