GUIDED ADJUSTMENT MODE
R5975238 BARCOVISION 701 MULTIMEDIA 070497
GUIDED ADJUSTMENT MODE
R5975238 BARCOVISION 701 MULTIMEDIA 070497
7-4
G
U
ID
E
D
ADJ
US
TME
N
T
MO
DE
7-4
G
U
ID
E
D
ADJ
US
TME
N
T
MO
DE
Selecting Setup Pattern
If an external source is con-
nected to the projector, the
Setup pattern menu will be dis-
played. Push the control disk
up or down to highlight the
desired setup pattern and then
press ENTER.
Genlocked pattern : internally
generated cross hatch pattern,
locked on the external source.
Internal # pattern : internally
generated cross hatch pattern
and locked on internal gener-
ated sync signals. (No external
source necessary)
C h o o s e
a s e t u p p a t t e r n
f r o m b e l o w :
Se lec t w ith o r
t h e n < E N TE R >
< E X I T> t o r e t u r n
S E L E C T E D S O U R C E
G E N L O C K E D P A T T E R N
I N T E R N A L # P A T T E R N
s o u r c e 1
ENTER continues to Guided Adjustment
Mode or Internal # Pattern Selection
EXIT returns to Path Selection
ADJUST returns to operational mode
If no external source is con-
nected to the projector, the in-
ternal cross hatch pattern menu
will be displayed.
The menus in this manual are
created for an external source,
connected to one of the inputs,
and the 'Genlocked pattern' is
selected.
Selecting Setup Pattern
If an external source is con-
nected to the projector, the
Setup pattern menu will be dis-
played. Push the control disk
up or down to highlight the
desired setup pattern and then
press ENTER.
Genlocked pattern : internally
generated cross hatch pattern,
locked on the external source.
Internal # pattern : internally
generated cross hatch pattern
and locked on internal gener-
ated sync signals. (No external
source necessary)
C h o o s e
a s e t u p p a t t e r n
f r o m b e l o w :
Se lec t w ith o r
t h e n < E N TE R >
< E X I T> t o r e t u r n
S E L E C T E D S O U R C E
G E N L O C K E D P A T T E R N
I N T E R N A L # P A T T E R N
s o u r c e 1
ENTER continues to Guided Adjustment
Mode or Internal # Pattern Selection
EXIT returns to Path Selection
ADJUST returns to operational mode
If no external source is con-
nected to the projector, the in-
ternal cross hatch pattern menu
will be displayed.
The menus in this manual are
created for an external source,
connected to one of the inputs,
and the 'Genlocked pattern' is
selected.
Summary of Contents for BarcoVision R9000740
Page 14: ...SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS R5975238 BARCOVISION 701 MULTIMEDIA 070497 1 8 ...
Page 46: ...CONTROLLING CONTROLLING R5975238 BARCOVISION 701 MULTIMEDIA 070497 5 12 ...
Page 124: ...SERVICE MODE R5975228 BARCOVISION 701 MULTIMEDIA 070597 SERVICE MODE 9 22 ...
Page 140: ...APPENDIX B ORBITING APPENDIX B ORBITING R5975238 BARCOVISION 701 MULTIMEDIA 070497 B 6 ...