![Barco BARCOVISION 8100 Owner'S Manual Download Page 43](http://html1.mh-extra.com/html/barco/barcovision-8100/barcovision-8100_owners-manual_473915043.webp)
5975617 BARCOVISION 8100 150197
CONNECTIONS
CO
NN
E
C
T
IO
N
S
5975617 BARCOVISION 8100 150197
CONNECTIONS
CO
NN
E
C
T
IO
N
S
7-3
7-3
- Power down the BARCOVISION 8100 and disconnect the power cord from the wall
outlet.
- Remove the dummy plate covering the chosen input slot by turning out both screws.
- Slide the input module in the free slot. Insure the module is seated correctly in the
guide grooves.
- Press on both handles of the input module until the module plug seats in the
connector of the BARCOVISION 8100.
- Secure the input module by tightening both retaining screws.
- Reconnect the power cord to the wall outlet and switch on the projector.
The new installed module can be selected with the digit buttons on the RCU or the local
keypad.
VIDEO/S-VIDEO INPUT MODULE
To the Video input :
Composite video signals from a VCR, OFF air signal decoder, etc...
1 x BNC 1.0Vpp ± 3 dB
To the S-Video input :
Separate Y-luma/C-chroma signals for higher quality playback of Super VHS-signals.
1 x 4 pins plug (mini DIN)
pin configuration :
1 ground luminance
2 ground chrominance
3 luminance 1.0 Vpp ± 3 dB
4 chrominance 282 mVpp ± 3 dB
VIDEO/S-VIDEO INPUT
On
On
S-Video input
Audio input not
available
Video input
- Power down the BARCOVISION 8100 and disconnect the power cord from the wall
outlet.
- Remove the dummy plate covering the chosen input slot by turning out both screws.
- Slide the input module in the free slot. Insure the module is seated correctly in the
guide grooves.
- Press on both handles of the input module until the module plug seats in the
connector of the BARCOVISION 8100.
- Secure the input module by tightening both retaining screws.
- Reconnect the power cord to the wall outlet and switch on the projector.
The new installed module can be selected with the digit buttons on the RCU or the local
keypad.
VIDEO/S-VIDEO INPUT MODULE
To the Video input :
Composite video signals from a VCR, OFF air signal decoder, etc...
1 x BNC 1.0Vpp ± 3 dB
To the S-Video input :
Separate Y-luma/C-chroma signals for higher quality playback of Super VHS-signals.
1 x 4 pins plug (mini DIN)
pin configuration :
1 ground luminance
2 ground chrominance
3 luminance 1.0 Vpp ± 3 dB
4 chrominance 282 mVpp ± 3 dB
VIDEO/S-VIDEO INPUT
On
On
S-Video input
Audio input not
available
Video input