5975617 BARCOVISION 8100 150197
INSTALLATION GUIDELINES
IN
ST
A
L
L
A
T
IO
N
GU
ID
EL
IN
ES
5975617 BARCOVISION 8100 150197
INSTALLATION GUIDELINES
IN
ST
A
L
L
A
T
IO
N
GU
ID
EL
IN
ES
3-4
3-4
* WHERE TO INSTALL THE PROJECTOR?
Definitions of the Abbreviation on drawings
B = Distance between ceiling and top of the screen or between floor and bottom of the
screen.
A = Correction value, distance between bottom side of projector and middle of the lens.
Value to be subtracted from B to obtain the correct installation position. (A value is a
constant value for all screen widths and type of lenses, 195 mm)
CD = Total distance between projector and ceiling or projector and floor.
SW = Screen width.
SH = Screen height (image height).
PD = Projector Distance, distance between screen and projector.
Inputs and computer video format input compatibility :
VIDEO and S-VIDEO
COMPONENT VIDEO
RGB ANALOG with STANDARD SYNC (SYNC ON GREEN or SEPARATE SYNC)*
RGB ANALOG with TRI-LEVEL SYNC (SYNC ON GREEN or SEPARATE SYNC)*
VGA : 640 x 480 pixels
MAC : 640 x 480 pixels
Super VGA : 800 x 600 pixels (only via windowing)
* Horizontal frequency max. 50 kHz AND maximum 700 vertical lines.
Lens type selection.
a) determine the required screen width.
b) determine the approximate position of the projector in the projection room with regard
to the screen and measure the projector-screen distance (PD).
c) refer to the lens diagrams to find the best corresponding PD with regard to the
measured projector-screen distance for the required screen width.
The lens type is determined (lens name is indicated on top of the page).
Start the installation procedure for the projector as described in the manual.
* WHERE TO INSTALL THE PROJECTOR?
Definitions of the Abbreviation on drawings
B = Distance between ceiling and top of the screen or between floor and bottom of the
screen.
A = Correction value, distance between bottom side of projector and middle of the lens.
Value to be subtracted from B to obtain the correct installation position. (A value is a
constant value for all screen widths and type of lenses, 195 mm)
CD = Total distance between projector and ceiling or projector and floor.
SW = Screen width.
SH = Screen height (image height).
PD = Projector Distance, distance between screen and projector.
Inputs and computer video format input compatibility :
VIDEO and S-VIDEO
COMPONENT VIDEO
RGB ANALOG with STANDARD SYNC (SYNC ON GREEN or SEPARATE SYNC)*
RGB ANALOG with TRI-LEVEL SYNC (SYNC ON GREEN or SEPARATE SYNC)*
VGA : 640 x 480 pixels
MAC : 640 x 480 pixels
Super VGA : 800 x 600 pixels (only via windowing)
* Horizontal frequency max. 50 kHz AND maximum 700 vertical lines
Lens type selection.
a) determine the required screen width.
b) determine the approximate position of the projector in the projection room with regard
to the screen and measure the projector-screen distance (PD).
c) refer to the lens diagrams to find the best corresponding PD with regard to the
measured projector-screen distance for the required screen width.
The lens type is determined (lens name is indicated on top of the page).
Start the installation procedure for the projector as described in the manual.
