Barco BarcoSLM G8, Owner'S Manual

Page: 141 / 151

B. Barco Control Manager
Changing the administrator password.
Handle as follow :
1. Enter the old password.
Only x’s will be displayed on the screen while typing in the new password.
2. Enter the new password.
3. Enter again the new password to confirm.
4. Click on apply to activate the new password.
B.5.4 Data & Time
IP
Internet Protocol. The network layer of TCP/IP. Required for communication with the internet.
TCP/IP
Transmission Control Protocol/Internet Protocol. The native protocol of the internet.
NTP
Network time protocol
Set up
To set up the time and date, handle as follow :
1. Select the time zone by clicking on the corresponding time zone in the Time zone list. (image B-16)
2. Select ’ Network time ’ by checking the Use NTP server box and fill out the IP-address of your local NTP server. This server gives
normally the GMT time, but due to time zone indication, the correct time will be filled out in the time and date text box after Apply
is click.
The ’Time’ and ’Date’ area will be grayed out but filled out with the correct time and date. The current time on projector will be
adapted.
Or,
Fill out the time and date text box with the following mask :
Time : hh:mm
Date : dd-mm-ccyy
The NTP server address box will be grayed out.
3. When summer time is active in your region and the time setting set up via the network time, check ’Daylight saving time’ to obtain
the correct time setting during the summer.
4. Click on Apply to activate.
The current time on projector will be adapted.
R5976386 BARCOSLM G8 20/10/2004 137