Barco BarcoiQ GRAPHICS 500 Owner'S Manual Download Page 10

Page: 10 / 143

1. Packaging and Dimensions

PULL

TO OPE

Image 1-1

R824562

R824561

R824518

(+ cable basket R724408

R825784

Projector

Image 1-2

Save the original shipping carton and packing material, they will be necessary if you ever have to ship your
projector. For maximum protection, repack your projector as it was originally packed at the factory.

AUTION

Never transport the projector with the lens mounted on it !

Always remove the lens before transporting the projector.

1.3

Lens Packaging

Way of Packaging

Lenses are supplied as an individual item.

They are packed in a carton box.

Save the original shipping carton and packing material, they will be necessary if you ever have to transport
the lens.

AUTION

Never transport the projector with the lens mounted on it !

Always remove the lens before transporting the projector.

1.4

Dimensions

Dimensions overview

Dimensions are given in mm (1 inch = 25.4 mm)

R5976367 BARCOIQ GRAPHICS 500 01/02/2007

Summary of Contents for BarcoiQ GRAPHICS 500
















































































































































Search results

Summary of Contents for BarcoiQ GRAPHICS 500

Reviews:

Related manuals for BarcoiQ GRAPHICS 500

Brands by name

Popular brands

Barco BarcoiQ GRAPHICS 500, Owner'S Manual

Search results

Summary of Contents for BarcoiQ GRAPHICS 500

Reviews:

Related manuals for BarcoiQ GRAPHICS 500

Brands by name

Popular brands