Barco BARCOIQ GRAPHICS 200L, Owner'S Manual, Page: 94 / 125

11. Image files menu
• Load : installation of a file for a new source
• Edit : editing a loaded file to match the source specifications
• Rename : renaming a file
• Copy : copying a file to a new file
• Delete : deleting an existing file
11.2Load file
How to load a file ?
1. Press MENU to activate the Toolbar
2. Press
→
to select the Image files item
3. Press
↓
to Pull down the Image files menu
4. Use
↑
or
↓
to select Load
5. Press ENTER
A dialogbox is displayed (image 11-2)
6. Use
↑
or
↓
to select the desired file
Tip: For more info about the available image files and the specifications, see Standard Image Files, page 111
7. Press ENTER
The file is loaded and the image is adapted.
Image 11-2
load file dialogbox in case of a video source
In PiP mode, the files which may be loaded will be of the data type if the active window is a data window, or
they will be of the video type if the active window is a video window.
What to do if the image is not perfect ?
If the displayed image is not correct after AutoImage or after selecting the best fitting file, go to the Edit menu, select the active file
and change the settings.
11.3Edit file
What can be done with the Edit file menu ?
The Edit file menu makes it possible to change the settings of the file according to the real settings of the connected source. Consult
the source specifications before entering the data.
88 R5976367 BARCOIQ GRAPHICS/REALITY 200L/300/400 10062002