Barco BARCOIQ GRAPHICS 200L, Owner'S Manual, Page: 32 / 125

3. Connections
Inputs
R
G
B H V
VIDEO
RGBHV R G B H V
-
RG
S
B R G
S
B
- - -
RGBS
R G B S
- -
Component PR Y PB
- - -
S-Video
- - - -
C Y
S-Video
C
-
Y
- - -
Composite VIDEO
- - - - -
Composite
-
VIDEO
- - - -
Composite
- -
VIDEO
- - -
Composite
- - - -
VIDEO
Signals
Composite
- - - - -
VIDEO
Table 3-2
Extended configuration of the 5 cable input: the first column gives the possible signals, and the first row the 5 cable input connectors (+ the standard Video BNC).
How to set up the 5 cable extended configuration ?
1. Connect the video or S-video source to the desired BNC connector
Note: In some cases an adapter cable is required (image 3-13, image 3-14, image 3-15)
Image 3-13
Connecting an S-Video signal on the Vs &
Video BNC
Image 3-14
Connecting an S-Video signal on the R & B
BNC
Image 3-15
Connecting composite Video signals on the
5 cable input
Multiple video signals can not be visualized simultaneously since there is only one decoder. However, the
use of the optional Audio & video layer(3) allows to visualize up to 2 different video signals (in PiP mode, see
Introduction to PiP, page 68).
3.11.3 S-Video extended configuration
What can be done ?
Beside the standard luminance (Y) and chrominance (C) signals, the advanced capabilities of the S-Video input make treatment of
additional signals possible:
• 2 composite video signal may be connected.
Inputs
Y C
S-Video Y C
Composite Video Video
-
Signals
Composite Video
-
Video
Table 3-3
Extended configuration of the S-Video input: the first column gives the possible signals, and the first row the S-Video inputs pins.
26 R5976367 BARCOIQ GRAPHICS/REALITY 200L/300/400 10062002