Barco BARCOIQ GRAPHICS 200L, Owner'S Manual, Page: 28 / 125

3. Connections
How to select the S-Video input ?
1. Press 4 on the RCU
Note: Another way for selecting this input is via Source on the local keypad or via the Menu.
The projector allows the input of more S-Video signals (up to 3 composite video signals).
S-Video extended configuration, page 26
The Audio&Video optional layer(3) allows the use of an additional S-Video input (referred to as S-Video4).
image 3-2
The selection of this optional input happens the same way as the standard input (key 4)
3.6 Digital Visual Interface (DVI) input
DVI
Digital Visual Interface is a display interface developed in response to the proliferation of digital flat panel displays. It
uses a high speed serial interface with TMDS (Transition Minimized differential signalling) to send data to the display.
DVI can be single or dual link.
Input specifications
Single link DVI
Differential input voltage: 200 mV - 800mV
Image 3-8
a DVI-I type connector analog link (4 pins at the right side of the connector) not supported
How to select the DVI Input ?
1. Press 5 on the RCU
Note: Another way for selecting this input is via Source on the local keypad or via the Menu.
3.7 Computer input
Input specification
TTL sync input : U
min
= 2.0 V
RGB input = 0.7 V
pp
± 3dB
22 R5976367 BARCOIQ GRAPHICS/REALITY 200L/300/400 10062002