3-2
Off-axis projection
5975349A RETRO BLOCK DATA 2100LC 200598
è
è
è
è
è
è
è
è
A
B
In order to change the discrete off-axis, the procedure described
below has to be executed.
Remove the lens from the lens holder by turning it counter
clockwise and put it in safe place (where it can't fall or be
scratched by something).
Turn out the indicated fixing screws while carefully holding the
lens mounting (otherwise it will fall). When all of them are
removed, take the lens mounting a few centimetres away from
the projector and unplug the connector of the IR receiver
(yellow cabling with white connector) on the right side of the
lens mounting.
Check if the sealing plate for diffused lightning is in the correct
position.
The position of the plate is depending on the chosen projection-
angel/lens combination:
If this is not the case, then undo the screws indicated with an
arrow, remove the plate, place it back in the correct position and
fix it.
3URMHFWLRQDQJHO/HQV
3RVLWLRQVHDOLQJSODWH
IRUGLIIXVHGOLJKWQLQJ
$
$
$
$
$
%
%
%
%
%
%
%
