6-11
5975708 BARCODATA 1209S 050698
Random Access Adjustment Mode
Select with or
then <ENTER>
<EXIT> to return.
Select with or
then <ENTER>
<EXIT> to return.
Seagull correction
Use this correction only if, after adjusting the vertical lines with the
side bow or side keystone, still a 'S' deformation is visible on the left
and the right side of the image.
The default value on the bar scale for this correction is 50.
Push the control disc up or down to highlight
SEAGULL CORREC-
TION
on the Left-Right menu and then press
ENTER
.
Eliminate the deformation by pushing the control disc to the left or to
the right until a straight line is obtained.
GEOMETRY
H PHASE
RASTER SHIFT
LEFT-RIGHT (E-W)
LEFT SIDE CORRECTION
TOP-BOTTOM (N-S)
H SIZE
V LINEARITY
V SIZE
BLANKING
Select with or
then <ENTER>
<EXIT> to return.
LEFT-RIGHT
V CENTERLINE BOW
V CENTERLINE SKEW
SIDE BOW
SIDE KEYSTONE
SEAGULL CORRECTION
GEOMETRY
H PHASE
RASTER SHIFT
LEFT-RIGHT (E-W)
LEFT SIDE CORRECTION
TOP-BOTTOM (N-S)
H SIZE
V LINEARITY
V SIZE
BLANKING
Select with or
then <ENTER>
<EXIT> to return.
LEFT SIDE CORRECTION
LEFT KEYSTONE
LEFT BOW
Ensure that the side bow and
keystone adjustments are done
prior to these fine adjustments
!
Correct the keystone geometry distortion of the
vertical lines
Correct the bow geometry distortion of the
vertical lines
Correct by pushing
the control disc to the
right
Correct by pushing
the control disc to the
left
To enter an alignment, push the control disc up or down to highlight
a function and press
ENTER
to activate this function.
Press
EXIT
to return.
All adjustments are indicated on the screen with the function name,
a bar scale and a number between 0 and 100.
Adjust the next alignments until the vertical lines on the left side are
straight.
Select with or
then <ENTER>
<EXIT> to return.
LEFT SIDE CORRECTION
LEFT KEYSTONE
LEFT BOW
Ensure that the side bow and
keystone adjustments are done
prior to these fine adjustments
!
ENTER
will select the Left Side Correction menu.
EXIT
will return to the random access adjustment menu.
ADJUST
returns to operational mode.
Left Side Correction
Left side corrections affect only the vertical lines of the set up pattern.
Only the green image is displayed while making the left side adjust-
ments. The red and blue images will automatically be corrected in the
same manner.
Convergence corrections are automatically disabled for the duration
of these adjustments.
Look only to the left side of the image while adjusting these fine tunings
(bow and keystone). Before starting the left side correction, insure
that the side bow and keystone adjustments are done prior to these
fine adjustments !
The following adjustments can be executed :
- Left keystone
- Left bow
Push the control disc up or down to highlight
LEFT SIDE CORREC-
TION
on the geometry menu and then press
ENTER
.
