6-5
5975708 BARCODATA 1209S 050698
Random Access Adjustment Mode
Select with or
<ENTER> to accept
<EXIT> to return.
Clamp Tuning
Highlight
CLAMP TUNING
by pushing the control disc up or down and
press
ENTER
to toggle between NORMAL and RESTORATION.
Select Normal : - for all standard sources and all sources with a
backporch > 0.8µs,
- for sources with noise and spikes in the signal.
Select Restoration
: - for standard sources with a backporch between
0.4 µs and 0.8 µs,
- for sources with sync separate or sync on Green.
Select with or
<ENTER> to accept
<EXIT> to return.
PICTURE TUNING
COLOR BALANCE
SYNC : FAST
PEAKING
CLAMP TUNING : normal
LINE DOUBLER :ON
Sync Fast/Slow Adjustment
The sync function is used to minimize horizontal jittering or tearing at
the top to the displayed image.
Highlight
SYNC
by pushing the control disc up or down and press
ENTER
to toggle between
FAST
and
SLOW
.
Note: SYNC is normally used in the SLOW position. For Video and
S-Video the sync is automatically set to FAST.
Select with or
<ENTER> to accept
<EXIT> to return.
PICTURE TUNING
COLOR BALANCE
SYNC : FAST
PEAKING
CLAMP TUNING : normal
LINE DOUBLER
ENTER
will toggle Sync between FAST and SLOW
EXIT
will return to the random access selection menu
PICTURE TUNING
COLOR BALANCE
SYNC : FAST
PEAKING
CLAMP TUNING : normal
LINE DOUBLER
Select with or
then <ENTER>
<EXIT> to return.
PEAKING
OFF
LOW FREQUENCY
MID FREQUENCY
HIGH FREQUENCY
Peaking
Peaking improves the contours in an projected image.
Highlight
PEAKING
by pushing the control disc up or down and press
ENTER
to display the peaking menu.
During the creation of new settings for a RGB source the correspond-
ing peaking is switched on as default.
For frequencies between :
15 kHz - 45 kHz : Low frequency peaking
45 kHz - 85 kHz : Mid frequency peaking
85 kHz - 135 kHz :High frequency peaking
If another peaking is desired, use the control disc to highlight
'low', 'mid' or 'high' frequency or to switch off the peaking.
