Barco Balder, Installation Manual

Page: 42 / 58

6. Advanced picture adjustments
Image 6-1
Enter the menu showe above,and select the input format from the dropdown menu.
Exit the menu.
6.3 Manual Cropping
Image 6-2
When the preset values do not match the input format, the manual mode must be used
Enter the menu, and select manual. The OSD will show four numeric values that may be changed, and each numeric value indicates
the number of black display lines that shall be removed.
Select the “top” value, and enter a suitable numeric value. If necessary, do several iterations in order to match the correct value.
Select the “bottom” value, and enter the same value as for the “top”.
Then the left and right sides must be adjusted. The value entered here must be equal to the vertical lines removed, multiplied with
the aspect ratio, in order to keep the correct correlation between the width and height
. Example: removed 200 lines in 16:9 format: 200 x (16/9) = number of lines to remove on each side.
38 601–0442 BALDER 13/09/2017