Barco Athena, User Manual

Page: 25 / 74

4. Input & Communication
9
Star button
Star button (reference 9 image 4-2). Pressing the Star button a few seconds will activate the ICMP reset process.
10
Key button
The (security) Key button (reference 10 image 4-2) is used for the authorization procedure to clear tamper errors etc.
(service purposes). Pin codes can be added/changed with the Communicator.
11
Zoom button
The Zoom button (reference 11 image 4-2) allows you to zoom in or out the projected image on the screen. The backlight
color of the Zoom button is red in case the end of range is reached.
12
Media control buttons
Buttons (reference 12 image 4-2) allowing you to navigate through the content on the integrated media server. If a test
pattern is activated, the projector will not show the content on the integrated media server.
Button backlight colors
• PURPLE : The backlight color of a button (or part of) is purple when pushed. This indicates that the requested action is ongoing.
The backlight color remains purple until the requested action is fi nished.
• GREEN : depending on the button the green backlight color can have a different meaning:
- for the Standby button a green backlight color means that the lamp is switched ON.
- for the Sleep button a green backlight color means that the projector is awake.
- for the Dowser button a green backlight color means that the electronic dowser is open (applied source can be displayed).
- for the Test Pattern button a green backlight color means that one test pattern is activated and thus the applied source can
be displayed.
- for the Key button a green backlight color means that the projector is secured (no tamper event).
• RED : depending on the button the red backlight color can have a different meaning:
- for the Shift, Zoom or Focus button a red backlight color indicates that the end of range is reached.
• YELLOW : The backlight color of the Numeric buttons 1 to 6 of the Local Keypad changes from white to yellow if the (security)
Key button is pressed.
• WHITE : depending on the button the white backlight color can have a different meaning:
- for the Standby button a white backlight color indicates that the lamp is OFF (not activated).
- for the Sleep button a white backlight color indicates that the projector is in Sleep mode.
- for the Dowser button a white backlight color indicates that the electronic dowser is closed (applied source can not be dis-
played).
- for the Test Pattern button a white backlight color indicates that no test pattern is selected (applied source can be displayed).
- for the Key button a white backlight color means that the projector is not secured (tamper event).
4.3 Projector Status
About the projector Status Light
The projector Status Light is located at the rear end of the projector (Tail Light). The projector Status Light is real time indicator of
the projector condition.
R5906789 ATHENA 16/12/2016 21