manualshive.com logo in svg

Barco Athena, User Manual, Page: 55 / 74

Share
Download
Barco Athena User Manual Download Page 55

6. Communicator Touch Panel

6. COMMUNICATOR TOUCH PANEL

About this chapter

This chapter gives a short introduction of the Communicator Touch Panel, describes how to install the Communicator Touch Panel
interface onto the top of your Athena and how to connect the interface. For operation instructions refer to the user guide of the
Communicator software. The latest software version and updated user guide for the Communicator can be downloaded from

https://my.barco.com

.

The Communicator Touch Panel is not included in the package of the projector. An alternative for the Communicator Touch Panel
is the use of the Communicator for PC (Mac, Linux or Windows).

Overview

•

Communicator Touch Panel

•

Installing the Touch Panel interface

•

Repositioning the Touch Panel interface

6.1

Communicator Touch Panel

Communicator Touch Panel for digital cinema projectors

The Communicator Touch Panel is designed for multi-user command and control. The Communicator enables users to learn quickly
and operate ef

fi

ciently - using an elegant and

fl

exible Touch Panel interface. The interface’s commonality means that operators

can intuitively use any model in the product line, without restriction, and its user-friendly nature translates directly into a short and
enjoyable learning curve.

Image 6-1

Flexible Touch Panel interface

The Touch Panel interface can be mounted upon a swivel arm which easily

fi

ts on top of the Athena. One central locking mechanism

of the swivel arm allows instant

fi

xation of the Touch Panel interface in any position.

The Touch Panel interface can also be installed further away from the Athena. For this purpose an Ethernet cable up to 50 meter
can be used to realize a direct data communication between the Athena and the Communicator Touch Panel.

The Touch Panel interface can also be connected via a Local Area Network (LAN) in the same way as the Athena. In this con

fi

gu-

ration both devices can communicate with each other as well.

The Touch Panel interface requires a voltage 12 VDC and 1,5 ampere. Note that the Athena has a 12 VDC output which
can be used to power up the Touch Panel interface. Nevertheless, the use of a se12 VDC adaptor (1,5 ampere minimum)
is required in case the Touch Panel interface is installed more then a few meters away from the Athena.

R5906789 ATHENA 16/12/2016

51

Summary of Contents for Athena











































































Reviews:

No comments