Barco AMM215WTTP, User Manual

Page: 28 / 38

R5911667 /03 AMM215WTTP 28
Contra-indications
This display is not intended to be used for direct diagnosis and therapeutic interventional radiology.
Intended users
Surgical displays are intended to be used by trained medical practitioners.
Notice to the user and/or patient
Any serious incident that has occurred in relation to the device should be reported to the manufacturer and the
competent authority of the Member State in which the user and/or patient is established.
WARNING: Excessive use may damage eyesight. Please rest for 10 minutes after use for 30
minutes. Children under the age of 2 should not watch the screen. Children over the age of 2 should
not watch the screen for more than 1 hour per day.
Manufacturing country
The manufacturing country of the product is indicated on the product label ( “ Made in …” ).
Importers contact information
To find your local importer, contact one of Barco ’ s regional offices via the contact information provided on our
website ( www.barco.com ).
FCC class B
This equipment has been tested and found to comply with the limit for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a typical medical installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to other devices in the vicinity. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to other devices, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving device.
• Increase the separation distance between the equipment.
• Connect the equipment to an outlet on a circuit different from that to which the other device(s) are
connected.
• Consult the manufacturer or field service technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
Because many medical offices are located in residential areas, this monitor, in addition to the medical
requirements, has also been tested and found to comply with the limits for FCC Class B computing devices in
a typically configured system. It is the system integrator or configurer
’ s responsibility to test and ensure that
the entire system complies with applicable EMC laws.
FCC responsible : Barco Inc., 3059 Premiere Parkway Suite 400, 30097 Duluth GA, United States, Tel: +1
678 475 8000
7.5 EMC notice
General information
This device is for use in professional healthcare facility environments only.
With the installation of the device, use only the delivered external cables and power supply or a spare part
provided by the legal manufacturer. Using another can result in a decrease of the immunity level of the device.
WARNING: Portable and mobile RF communications equipment may affect the normal function of
the AMM215WTTP.
Important Information