8. Advanced
Image 8-33
The filmmode detection insures that these converted signals are shown without artefacts, especially motion artefacts due to bad
de-interlacing.
This function may cause undesired effects on standard sources, therefore it can be disabled (OFF) at any time
Enabling/disabling the filmmode detection
1. Press
MENU
to activate the Tool bar
2. Press
→
to select the
Image
item
3. Press
↓
to Pull down the
Image
menu
4. Use
↑
or
↓
to select
Filmmode detection
5. Press
→
to pull down the menu
6. Use
↓
or
↑
to enable or disable the Filmmode detection
Image 8-34
7. Press
ENTER
A white bullet shows the active setting
8.4.5
Input balance
Introduction: Unbalanced color signals
When transporting signals, there is always a risk of deterioration of the information contained in the signals.
The alterations of the three color signals will happen independently i.e. the colors will end to be unbalanced,
R5976821 BARCO ICON 15/03/2007
93
