4. Installation
Image 4-24
1
Function keys
user programmable keys with functions for direct access.
2
MENU
Menu key, to enter or exit the Tool bar menu.
3
Address key
(recessed key), to enter the address of the projector (between 0 and 9). Press the recessed
address key with a pencil, followed by pressing one digit button between 0 and 9.
4
LOGO key
not implemented
5
PAUSE
to stop projection for a short time, press ’PAUSE’. The image disappears but full power is
retained for immediate restarting.
6
STBY
standby button, to start projector when the power switch is switched on and to switch off the
projector without switching off the power switch.
Attention : Switching to Standby. When the projector is running and you want to
go to standby, press the standby key for 2 seconds.
7
MUTE
to interrupt the sound reproduction (audio = optional.
8
AUTOIMAGE
Auto image, to center the image on the active LCD surface.
9
Digit buttons
direct input selection.
9b
SOURCE button
the Source Selection menu is opened
10
Lens control
use these buttons to obtain the desired ZOOM, SHIFT, FOCUS.
11
VOL
use this button to obtain the desired sound level (audio = optional)
12
Picture controls
use these buttons to obtain the desired picture analog level.
R5976821 BARCO ICON 15/03/2007
31
