Barbeskew BARBESKEW II, User Manual And Assembly Manual

Page: 13 / 34

9
MOTORS
REPLACING MOTORS & DRIVE SHAFT
Remove the batteries.
Undo the four securing screws on the inside of the motor – behind where the batteries would sit
(Not the ones on the outside of the motor!).
Remove the motor and drive shaft* from the BarbeSkew. If the drive shaft is broken then make sure
you remove any additional parts of the drive shaft that may have been left in the mechanism.
Replace the drive shaft ensuring that the end with the little square hole is pushed back into the
skewer rack to allow it to have a kebab skewer pushed into it. If you insert it the wrong way round
then when re-assembled you will not be able to insert a kebab skewer in the central location.
Finally re-attach the motor.
*PLEASE NOTE: The rear motor drive shaft is different to the side motor drive shaft, ensure you order
the correct replacement. 1.
2.
3.
4.
5.
1. 2. 3.
4.
HOW TO REPLACE THE REAR MOTOR AND/OR DRIVE SHAFT
(KEBAB SKEWER MOTOR)
Replacement motors / rear drive shafts are available and can be purchased from www.barbeskew.co.uk/accessories
5.