Cart & Barbecue Assembly
(requires an assistant)
1. Unpack Cart.
2. Unpack Barbecue.
3. Position barbecue on top of Cart.
4. Remove Left & Right Side Panels on both sides of cart
as shown in Figure 8.
5. With the help of your assistant, position barbecue on top
of Cart and align mounting holes as shown in Figure 9.
6. Secure with two Mushroom Head bolts and nuts at both
front sides. Do not tighten until all fasteners are in place.
7. Secure with Washer Head bolts (no nuts required) as
follows:
Y0662 (52” BBQ)
6 bolts at rear & side
Y0663 (38” BBQ)
5 bolts at rear & side
Y0665 (27” BBQ)
4 bolts at rear & side
You may need your assistant to adjust the position of the
barbecue so that the holes are all aligned.
8. Once barbecue & cart are aligned, tighten all bolts.
9. Replace Left & Right Side Panels.
Air Vents
Louvers on BBQ must
remain unobstructed to
allow for combustion air.
Figure 7
Natural Gas
Installation
CSA Approved
Natural Gas
Regulator
3/8 FF x 1/2 MP for Y0665
1/2 FF x 1/2 MP for Y0662 &
Y0663
(refer to Pg. 13)
Stainless
Flexline
Natural
Gas
Supply
Shut-off Valve
1/2-1/2” NPT
Close Nipple
Access must be provided
to Shut-off Valve
Figure 6
Natural Gas models only
Figure 8
Yellow Teflon Pipe Thread
Sealant is recommended
for use on all pipe thread
connections
EXCEPT
flared threads.
IMPORTANT :
Regulator must be
on the Barbecue
or your warranty
is void.
IN
OUT
- 7 -
Side Panel
Bolts
CSA Approved
Rubber Gas Hose
Cart model LP Gas
Connection
3/8 FF x 3/8 MF
use on Y0665, Y0662 & Y0663
Propane models
refer to Page 13
Figure 9
Nutserts
Washer
Head
Bolts
Nuts at
front only
(2)
Bolts
