background image

Turbo STS Instruction Manual

3 Burner Standard                      720-0057-3B
4 Burner Standard                      720-0057-4B
4 Burner (2Mn+2SR)+RB            750-0057-4BRB
3 Burner Cart                             780-0222
4 Burner Cart                             780-0228

Note: We highly recommend you always cover this barbecue when it is not in use which will prolong the life of
the barbecue and protect it from the elements.

Design Certified

Unit approved by

CSA Laboratories under standard

ANSI Z21-58b-2002/CGA 1.6b-2002

America's  Largest  Chain  of  Barbecue  Stores

Customer Service Helpline: If you have questions about assembly or grill operation, or if there are damaged or missing
parts when you unpack this unit from the shipping box, call us Monday through Friday at 1-800-752-3085

REV 030

3

06

®

n

WARNING:

All barbecues and carts are designed for outdoor use only!

All barbecues are not intended for commercial use.

Read this Owner’s Manual carefully and
be sure your gas grill is properly assem-
bled, installed and maintained. Failure to
follow these instructions could result in
serious bodily injury and/or property dam-
age. This gas grill is intended for outdoor
use only and is not intended to be installed
in or on recreational vehicles or boats.

Note to Installer:

Leave this Owner’s

Manual with the consumer after delivery
and/or installation.

Note to Consumer:

Leave this Owner’s

Manual in a convenient place for future
reference.

FOR YOUR SAFETY, IF YOU SMELL GAS :

1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. Open lid.
4. If odor continues, immediately call your gas

supplier.

5. Do not store or use gasoline or other flammable

vapors and liquids in the vicinity of this or any
other appliance.

6. An LP cylinder not connected for use should not

be stored in the vicinity of this or any other
appliance.

Summary of Contents for Turbo STS

























Reviews: