Connecting to a portable LPG cylinder
Hang the LPG cylinder to the cylinder hook on the left side of the barbeque.
Before connecting the cylinder, inspect the hose fittings and rubber seals. If there is any sign of
splitting or wear. Have the parts or whole hose assembly replaced. Only use authorised genuine
parts.
Now take the hose and connect the regulator end to the gas cylinder, You won’t need a spanner
here. Just turn the fitting in an anticlockwise direction and hand tighten ad much as you can. This
should seal it sufficiently Ensure the gas cylinder is secure on the hook, and that it remains
upright at all times.
The hose is already factory fitted to the
5/8”- 18 UNF (3/8” SAE) male inlet on manifold left side of
barbeque.
DO NOT USE NAKED FLAME FOR
LOCATING GAS LEAKS. IF A LEAK
PERSISTS, CALL AN AUTHORISED
PERSON
# 31
# 16
# 15
# 17
LPG
Cylinder
(not
included)
STEP 15
