Barbeques Galore G4CNSM Page 21 Assembly And Operation Instructions Manual Download

Page: 21 / 21

If the hose is replaced it must be secured to the appliance using a spanner to tighten it onto the

connection thread. Always check for leaks after making any new connections. Disconnect the regulator

from the cylinder only (according to the directions supplied with the regulator) when the barbeque is not in

use.

Data plate:

Manufactured by:

GUANGDONG KANGYE ELECTRIC APPLIANCE CO., LTD

Need More Information?

Call your local Barbeques Galore, our barbeque experts will be happy to help:

Phone: 1 300 301 392

Or visit us online at: www.barbequesgalore.com.au

Barbeques Galore GLG Australia Pty Ltd (ABN 70 001 185 002)

Building A2, Campus Business Business Park, 350-374 Parramatta Road.

Homebush NSW 2140 AUSTRALIA Phone 02 9735 4111

G4CNSM_M-SERIES_06 16

Summary of Contents for G4CNSM






















Search results

Summary of Contents for G4CNSM

Reviews:

Related manuals for G4CNSM

Brands by name

Popular brands

Barbeques Galore G4CNSM, Assembly And Operation Instructions Manual

Search results

Summary of Contents for G4CNSM

Reviews:

Related manuals for G4CNSM

Brands by name

Popular brands