www.desatech.com
901746-01E
5
INSTALLATION
WARNING: The Massachu-
setts State Board requires all
installations be performed by
a Licensed Plumber or Gas Fit
-
ter. Massachusetts state code
requires all vent dampers be
welded open or removed.
CAUTION: Do not remove
the data plates attached to the
burner pan. The data plates
contain important warranty and
safety information.
WARNING: Before installing
in a solid fuel burning fireplace,
the chimney flue and firebox
must be cleaned of soot, creo
-
sote, ashes and loose paint by
a qualified chimney cleaner.
Creosote will ignite if highly
heated. A dirty chimney flue may
create and distribute soot within
the house. Inspect chimney flue
for damage.
NOTICE: Installation, service,
and repair of this appliance must
be performed by a qualified in
-
staller, service agency, company
or gas supplier experienced with
this type of gas appliance. Only
factory authorized components
listed in these instructions may
be used in accordance with the
manufacturer’s instructions and
all codes and requirements of
the authority having jurisdic
-
tion. Any modifications to this
kit, or use of unauthorized
components or accessory items
will void the manufacturer’s
warranty, and may result in a
hazardous condition.
FLUE OPENING SPECIFICATIONS
Note: This vented appliance must be installed
only in a solid-fuel burning fireplace with a
working flue and constructed of noncombus
-
tible material.
The charts in Figure 2, page 6, indicate tech
-
nical information regarding the installation of
your gas log set. Please make sure that all of
the specifications shown are applicable before
installation is attempted.
The fireplace must include a working flue and
venting system with minimum openings
